1.PRODUCT AND COMPANY IDENTIFICATION
PROTEX-CI (ACID CORROSION INHIBITOR)
Revision date: 01/04/2010
Supplier: Creative Business Systems
07, Agrawal Estate, Gulab nager, Amraiwdi, Ahmedabad - 380 026 Gujarat, INDIA
For non-emergency information: Telephone number: 079 22742526
For emergency: Telephone number:
Spill Emergency 91-98250 08956
Health Emergency 91-98250 08956
2.COMPOSITION/INFORMATION ON INGREDIENTS
The product contains special organic compounds with suitable polymers in it,
which creates layer (film) on the surface protecting it from corrosion.
3.HAZARDS IDENTIFICATION
Emergency Overview
Appearance
Form Viscous liquid
Color Yellowish brown liquid
Odor Typical pungent odor
Hazard Summary Toxic
Potential Health Effects
Primary Routes of Entry: Eye contact
Nose: Direct and repeated inhalation of the material cause headache
Eyes: Direct contact with material can cause the following:
Irritation
Skin: Prolonged or repeated skin contact can cause the following:
Slight irritation
4.FIRST AID MEASURES
Inhalation: Move to fresh air.
Skin contact: Wash
persists, call a physician.
Eye contact: Rinse with plenty of water. If eye irritation persists, consult a
specialist.
Ingestion: Consult a physician immediately. Never give anything by mouth to an unconscious person.
5.FIRE-FIGHTING MEASURES
Flash point Noncombustible
Lower explosion limit Not applicable
Upper explosion limit Not applicable
Thermal decomposition >230.00 °C
Suitable extinguishing media:
Use extinguishing media appropriate for surrounding fire.
Specific hazards during fire fighting:
Material can splatter above 100C/212F. Dried product can burn.
Special protective equipment for fire-fighters:
Wear self-contained breathing apparatus and protective suit.
6.ACCIDENTAL RELEASE MEASURES
Personal precautions
Use personal protective equipment.
Keep people away from and upwind of spill/leak.
Environmental precautions
CAUTION: Keep spills and cleaning runoff out of municipal sewers and open bodies Of water
Methods for cleaning up
Collect spills immediately with wearing hand gloves.
Wash the surface with plenty of water until foaming and slippery condition disappears. Transfer liquids and solid spilled material to separate suitable containers for recovery or disposal.
7.HANDLING AND STORAGE
Handling
Vapors can be evolved when material is heated during processing operations. See SECTION 8, for types of ventilation required.
Further information on storage conditions:
No special storage condition is required.
Storage:
Storage temperature: No specific temperature is required.
8.EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure limit(s)
Exposure limits are listed below, if they exist.
Eye protection: safety glasses with side-shields. Eye protection worn must be compatible with respiratory protection system employed.
Hand protection: The glove(s) listed below may provide protection against
permeation. Gloves of other chemically resistant materials may not provide adequate protection): Neoprene gloves
Respiratory protection: A respiratory protection program meeting OSHA 1910.134 and ANSI Z88.2 requirements or equivalent must be followed whenever workplace conditions warrant a respirator's use. None required under normal operating conditions. Where vapors and/or mists may occur, wear a properly fitted NIOSH approved (or equivalent) half-mask, air-purifying respirator. Air-purifying respirators should be equipped with NIOSH approved (or equivalent) organic vapour cartridges and N95 filters. If oil mist is present, use R95 or P95 filters.
Protective measures: Facilities storing or utilizing this material should be equipped with an eyewash facility.
Engineering measures: Use local exhaust ventilation with a minimum capture velocity of 100 ft/min. (0.5 m/sec.) at the point of vapor evolution. Refer to the current edition of Industrial Ventilation: A Manual of Recommended Practice published by the American Conference of Governmental Industrial Hygienists for information on the design, installation, use, and maintenance of exhaust systems.
9.PHYSICAL AND CHEMICAL PROPERTIES
Appearance
Form Viscous liquid
Color Yellowish brown
Odor Typical pungent odor
pH <2.0
Boiling point/range Not applicable
Melting point/range Above 4000C
Flash point Noncombustible
Lower explosion limit Not applicable
Upper explosion limit Not applicable
Vapor pressure Not applicable
Relative vapor density Not applicable
Water solubility Hazy/milky soluble
Density 0.96±0.02 @ 25°c
Evaporation rate >1.00 Water
Percent volatility Not specific
NOTE: The physical data presented above are typical values and should not be construed as a specification.
10.STABILITY AND REACTIVITY
Hazardous reactions None known.
Stable However, avoid temperatures above 230C/446F.
Thermal decomposition is dependent on time and Temperature
Materials to avoid There are no known materials which are incompatible
with this product
Hazardous decomposition products Thermal decomposition may yield carbon dioxide.
11.TOXICOLOGICAL INFORMATION
Acute oral toxicity LD50 rat > 5,000 mg/kg
Acute dermal toxicity LD50 rabbit > 5,000 mg/kg
Skin irritation rabbit: No skin irritation
Eye irritation rabbit: slight irritation
12.ECOLOGICAL INFORMATION
Eco-toxicity effects
Toxicity to fish: LC50 Rainbow trout 96h >1,000 mg/l
Toxicity to fish: LC50 Bluegill sunfish
(Lepomis macrochirus) 96h >1,000 mg/l
Toxicity to aquatic invertebrates: EC50 Daphnia magna 48 h >1,000 mg/l
13.DISPOSAL CONSIDERATIONS
Environmental precautions: CAUTION: Keep spills and cleaning runoff out of
municipal sewers and open bodies of water.
Disposal
Waste Classification: When a decision is made to discard this material as
supplied, it does not meet RCRA's characteristic definition of ignitability, corrosivity, or reactivity, and is not listed in 40 CFR 261.33. The toxicity characteristic (TC), however, has not been evaluated by the Toxicity Characteristic Leaching Procedure (TCLP).
For disposal, incinerate or landfill at a permitted facility in accordance with local, state, and federal regulations.
14.TRANSPORT INFORMATION
DOT Not regulated for transport
IMO/IMDG Not regulated (Not dangerous for transport)
Transportation classifications may vary by container volume and may be influenced by regional or country variations in regulations
15.REGULATORY INFORMATION
Workplace Classification This product is considered non-hazardous under the
OSHA Hazard Communication Standard (29CFR1910.120).This product is not a 'controlled product' under The Canadian Workplace Hazardous Materials Information System(WHMIS).
SARA Title III: Section 311/312 Categorizations (40CFR370):
This product is not a hazardous chemical under 29CFR 1910.1200, and therefore is Not covered by Title III of SARA.
SARA Title III: Section 313 Information (40CFR372):
This product does not contain a chemical which is listed in Section 313 at or above de minimis concentrations.
CERCLAInformation (40CFR302.4):
Releases of this material to air, land, or water are not reportable to the National Response Center
US Toxic Substances Control Act (TSCA):
All components of this product are in compliance with the inventory listing requirements of the U.S. Toxic Substances Control Act (TSCA) Chemical Substance Inventory.
Any material listed as "Not Hazardous" in the CAS REG NO. Column of SECTION 2,Composition/Information On Ingredients, of this MSDS is a trade secret under the provisions of the Pennsylvania Worker and Community Right-to-Know Act.
16.OTHER INFORMATION
Hazard Rating
Health Fire Reactivity
HMIS100 0 0 0
Legend
ACGIH American Conference of Governmental Industrial Hygienists
BAc Butyl acetate
OSHA Occupational Safety and Health Administration
PEL Permissible Exposure Limit
STEL Short Term Exposure Limit
TLV Threshold Limit Value
TWA Time Weighted Average (TWA):
| Bar denotes a revision from prior MSDS.
Notice:
This material safety data sheet must be made available to all persons who, by the nature of their employment, may handle or come into contact with this material.
Disclaimer:
The percentage weight (% w/w) of ingredients is not to be taken as a specification guaranteed by Creative Business Systems, but only as an approximate guide to the content of hazardous ingredients in the material. The information contained herein does not constitute a guarantee by Creative Business Systems concerning the properties of the material. The information contained in this material safety data sheet is offered in good faith and is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is offered without warranty, representation, inducement or licence and Creative Business Systems assumes no legal responsibility for reliance upon same. Creative Business Systems disclaims any liability for loss, injury or damage incurred in connection with the use of the material or its associated material safety data sheet. This information is not be construed as a representation that the material is suitable for any particular purpose or use except those conditions and warranties implied by either commonwealth or state statutes. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Customers are encouraged to make their own enquiries as to the material's characteristics and, where appropriate, to conduct their own tests in the specific context of the material's intended use.
